VENDORS | ||
Advance Tabco | (1) | |
All Points | (8) | |
Eagle | (1) | |
Hobart | (4) | |
InSinkErator | (4) | |
Thunder Group | (4) |
TYPE | ||
drain strainer | (6) | |
grate | (2) |
Stainless steel Grate, for FDR-1212 floor drain
Floor Drain Strainer, 11" square x 2" high, fine mesh, rests on top of floor drain
Full Floor Sink Grate, top, 9 1/4", porcelain
Full Floor Sink Top Grate, 9-1/4" porcelain, 1/2
Drop-In Floor Drain Strainer (ICS item B766), 8-1/2" x 8-1/2" x 2-1/2" D, white, plastic, 1/8" holes
Flanged Floor Drain Strainer (ICS item B767), 8-1/2" x 8-1/2" x 4" D, white, plastic, 3/16" holes
Floor Drain Strainer (ICS item B823), 6-1/2" x 6-1/2" X 3" D, white, plastic
Drop-In Floor Drain Strainer (ICS item B850), 3-5/8" top diameter, black, plastic
Drop-In Floor Drain Strainer, 8-1/2"L, 8-1/2"W, 2-1/2"H, 3/16" holes, white, plastic
Trough magnet (6935)
Trough magnet
Trough magnet
Trough magnet
Trough nozzle assembly (15493), To be used with PowerRinse Trough applications for operator to rinse and scrap plateware etc. Also known as "gusher" heads, trough nozzles create a plume of water for rinsing into the trough. A minimum of 1 trough nozzle is recommended by the factory for each PRT unit used. The number of trough nozzles needed may vary and should be determined by the length of the trough and number of operators scrapping at the trough (recommended)
Floor Drain Strainer, 8-1/2" x 8-1/2" x 2-1/4", square, ABS-plastic (12 each minimum order)
Floor Drain Strainer, 10" x 10" x 3", square, 0.8mm, 18/8 stainless steel (6 each minimum order)
Floor Drain Strainer, 8-1/2" x 8-1/2" x 3", square, 0.8mm, 18/8 stainless steel (12 each minimum order)
Floor Drain Strainer, 10" x 10" x 5", square, 0.8mm, 18/8 stainless steel (6 each minimum order)