placa fría para buffet empotrada módulo, refrigeración incorporada, 198.755cmde ancho x 43.815cmD superficie de acero inoxidable, 300 Series superficie de acero inoxidable borde con cornisa & con seguros (frenos) etiquetas/pestañas, cubierta exterior de acero , remoto montado encendido/apagado interruptor placa delantera (5.5563cmde ancho x 10.4775cmH abertura requerido(a)(s)), condensador enfriado por el aire, 2.54cm desagüe de bronce & enchufe, R134A, 1.8288m cordón & NEMA 5-15P, cULus, UL EPH classified (220.98cmde ancho x 58.42cmD abertura requerido(a)(s))
Fabricante | Duke |
Modelo # | DUK-ADI-6FT |
Empacado | Each |
DEPTH (FRONT - BACK) | 24" |
COMPRESSOR | With 1/4 Hp Compressor |
WIDTH (SIDE - SIDE) | 88" |
Drop-In Cold Food Pan, iced cold pan, 88"W x 24"D x 9-1/4"H, accommodates (6) 6" deep 12" x 20" pans, 300 series stainless steel top with overhang, 8" deep 300 series stainless steel interior liner, steel exterior housing, (5) adapter bars included, 1" brass drain & plug, NSF (88"W x 23"D cutout required for unit)
Drop-In Cold Food Pan, mechanically assisted ice pan, 88"W x 24"D x 22-1/2"H, accommodates (6) 6" deep 12" x 20" pans, 300 series stainless steel top with overhang & locking tabs, 8" deep 300 series stainless steel interior liner, steel exterior housing, remote mounted on/off switch with stainless steel face plate (2-3/16"W x 4-1/8"H cutout required), air-cooled condensing unit, (5) adapter bars included, 1" brass drain & plug, R134a, 6' cord & NEMA 5-15P, UL EPH Classified, cULus (87"W x 23"D cutout required for unit)
Cold Food Drop-In Unit, Tri-Channel NSF 7 stainless steel mechanical cold pan, (5) section, 8" deep, holds 1/3, 1/6, 1/9 pans without adding adapters, stainless steel top rim & interior liner, steel exterior, remote on/off switch, 6' cord & NEMA 5-15P, 120V/60/1-ph, 0.4 HP, 6.5 amps, cUL, UL EPH Classified
Drop-In Cold Food Pan, mechanically assisted ice pan, 60"W x 24"D x 19-1/2"H, accommodates (4) 4" deep 12" x 20" pans, 300 series stainless steel top with overhang & locking tabs, 5" deep 300 series stainless steel interior liner, steel exterior housing, remote mounted on/off switch with stainless steel face plate (2-3/16"W x 4-1/8"H cutout required), air-cooled condensing unit, (3) adapter bars included, 1" brass drain & plug, R134a, 6' cord & NEMA 5-15P, cULus, UL EPH Classified (59"W x 23"D cutout required for unit)