| SUBCATEGORIES | ||
| RESTAURANT EQUIPMENT | ||
| Refrigeration | (1) | |
| Cooking Equipment | (7) | |
| Bar Equipment | (1) | |
| Food Prep | (495) | |
| Dish Washing Equipment | (76) | |
| Work Tables and Equipment Stands | (7) | |
| Water Filtration | (6) | |
| SINKS & PLUMBING | ||
| Sinks | (2) | |
| Floor Troughs and Floor Drains | (4) | |
| Disposers | (9) | |
| SMALLWARES | ||
| Kitchen Supplies | (1) | |
| TABLETOP | ||
| Dinnerware | (1) | |
| STORAGE & TRANSPORT | ||
| Storage Racks | (2) | |
| Tray Carts, Racks, and Dollies | (1) | |
| Dinnerware Storage and Transport | (1) | |
| Personal Protection Equipment (PPE) | (1) | |
| PRICES | ||
| (7) | ||
| Less than $ 40,000 | (567) | |
| $ 40,000 - $ 80,000 | (27) | |
| $ 80,000 - $ 120,000 | (13) | |
| $ 120,000 - $ 160,000 | (1) | |
| SIZE | ||
| full/standard | (4) | |
| various | (2) | |
| .031" | (1) | |
| .063" | (3) | |
| .078" | (3) | |
| .125" | (2) | |
| .156" | (9) | |
| .218" | (4) | |
| .281" | (1) | |
| .313" | (3) | |
| .375" | (7) | |
| .500" | (3) | |
| .563" | (1) | |
| .625" | (4) | |
| .750" | (2) | |
| 1.000" | (1) | |
| 5 qt | (5) | |
| 12 qt | (11) | |
| 20 qt | (16) | |
| 30 qt | (7) | |
| More ... | ||
| ATTACHMENT | ||
| bowl | (19) | |
| bowl dolly adapter | (2) | |
| bowl extender | (2) | |
| bowl scraper | (8) | |
| dough hook | (18) | |
| flat beater | (19) | |
| pastry knife | (6) | |
| splash cover | (6) | |
| wing whip | (6) | |
| wire whip | (26) | |
Bowl Scraper for 80 quart bowl
Salad Dryer, floor model, 20-gallon capacity (approximately 16 heads of lettuce), 406 RPM, polyethylene outer tub & lid, polyethylene spin basket with handle grips, fully sealed polyethylene base, 5-minute timer, permanently lubricated gear drive, drain pipe extension tube, stainless steel motor splashguard, casters with brakes, 1/4 HP motor with thermal overload, 115v/60/1-ph, 2.5 amps, UL, NSF
Salad Dryer, floor model, 20 gallon capacity (approximately 16 heads of lettuce), 406 RPM, stainless steel outer tub & lid, polyethylene spin basket with handle grips, fully sealed polyethylene base, 5-minute timer, permanently lubricated gear drive, drain pipe extension tube, stainless steel motor splashguard, casters with brakes, 1/4 HP motor with thermal overload, 115/60/1, 2.5 amps, UL, NSF
1/2" Soft Slicing Plate (12mm)
3/8" Soft Slicing Plate (10mm)
5/16" Soft Slicing Plate (8mm)
5/8" Soft Slicing Plate (15mm)
1/16" shredder plate (1.5mm)
1/8" shredder plate (3.0mm)
3/16" shredder plate (4.5mm)
3/8" Shredder Plate (10mm)
5/16" shredder plate (8.0mm)
5/64" Shredder Plate (2mm)
7/32" shredder plate (6.0mm)
Adjustable Sink Rail Kit for 3-compartment sink (typically ordered with saddle & leg extension)
1/16" fine slicer plate (1.5mm) for FP100
1/32" Slicing Plate (1mm), stainless steel knife, plate, hub & drive pin, replaceable knives
1/8" Slicing Plate (3mm), stainless steel knife, plate, hub & drive pin, replaceable knives
3/8" fine slicer plate (10.0mm)
5/16" Slicing Plate (8mm), stainless steel knife, plate, hub & drive pin, replaceable knives
5/32" fine slicer plate (4.0mm)
7/32" fine slicer plate (6.0mm)
Español