| VENDORS | ||
| Advance Tabco | (101) | |
| All Points | (1) | |
| Atosa | (4) | |
| Eagle | (23) | |
| Krowne | (2) | |
| PRICES | ||
| (1) | ||
| $ 10 - $ 186 | (49) | |
| $ 186 - $ 311 | (38) | |
| $ 311 - $ 800 | (44) | |
Dishtable Undershelf, 24"W x 24"D, adjustable die cast leg clamps, stainless steel (size undershelf to be at least 6" shorter than dishtable)
Dishtable Undershelf, 30"W x 24"D, adjustable die cast leg clamps, stainless steel (size undershelf to be at least 6" shorter than dishtable)
Dishtable Undershelf, 42"W x 24"D, adjustable die cast leg clamps, stainless steel (size undershelf to be at least 6" shorter than dishtable)
Dishtable Undershelf, 54"W x 24"D, adjustable die cast leg clamps, stainless steel (size undershelf to be at least 6" shorter than dishtable)
Dishtable Undershelf, 66"W x 24"D, adjustable die cast leg clamps, stainless steel (size undershelf to be at least 6" shorter than dishtable)
Dishtable Undershelf, 78"W x 24"D, adjustable die cast leg clamps, stainless steel (size undershelf to be at least 6" shorter than dishtable)
Eye Wash Attachment, attaches to standard spout, adjustable aerated outlet heads, float-off dust covers, pull knob activation, removable aerator on bottom, chrome plated forged brass body (Not to be used with foot or knee operated units or electronic faucets)
Sink Cover, Poly-Vance, for 10" x 14" Deep Drawn bowl (design of sink bowl is such that poly sink cover will be approximately flush with tabletop or drainboard work surface)
Sink Cover, Poly-Vance, for 14" x 16" Deep Drawn bowl (design of sink bowl is such that poly sink cover will be approximately flush with tabletop or drainboard work surface)
Sink Cover, Poly-Vance, for 16" x 20" Deep Drawn bowl (design of sink bowl is such that poly sink cover will be approximately flush with tabletop or drainboard work surface)
Sink Cover, Poly-Vance, for 18" x 24" Deep Drawn bowl (design of sink bowl is such that poly sink cover will be approximately flush with tabletop or drainboard work surface)
Sink Cover, Poly-Vance, for 20" x 20" Deep Drawn bowl (design of sink bowl is such that poly sink cover will be approximately flush with tabletop or drainboard work surface)
Sink Cover, Poly-Vance, for 24" x 24" Deep Drawn bowl (design of sink bowl is such that poly sink cover will be approximately flush with tabletop or drainboard work surface)
Sink Cover, Poly-Vance, for 14" x 14" Deep Drawn bowl (design of sink bowl is such that poly sink cover will be approximately flush with tabletop or drainboard work surface)
Continuous Waste, for 2 or 3-compartment, sinks
Support Bracket, for lever waste drain handle, (1) support required for each lever drain
Sink Cover, stainless steel, for 10" x 14" Deep Drawn bowl (rests on edges of sink bowl such that the sink cover will be approximately flush with the top of the sink bowls, recessed about 3/4" from the tabletop or drainboard work surface)
Sink Cover, stainless steel, for 14" x 16" Deep Drawn bowl (rests on edges of sink bowl such that the sink cover will be approximately flush with the top of the sink bowls, recessed about 3/4" from the tabletop or drainboard work surface)
Sink Cover, stainless steel, for 16" x 20" Deep Drawn bowl (rests on edges of sink bowl such that the sink cover will be approximately flush with the top of the sink bowls, recessed about 3/4" from the tabletop or drainboard work surface)
Sink Cover, stainless steel, for 18" x 24" Deep Drawn bowl (rests on edges of sink bowl such that the sink cover will be approximately flush with the top of the sink bowls, recessed about 3/4" from the tabletop or drainboard work surface)
Sink Cover, stainless steel, for 20" x 20" Deep Drawn bowl (rests on edges of sink bowl such that the sink cover will be approximately flush with the top of the sink bowls, recessed about 3/4" from the tabletop or drainboard work surface)
Sink Cover, stainless steel, for 24" x 24" Deep Drawn bowl (rests on edges of sink bowl such that the sink cover will be approximately flush with the top of the sink bowls, recessed about 3/4" from the tabletop or drainboard work surface)
Sink Cover, stainless steel, for 20" x 28" Deep Drawn bowl (rests on edges of sink bowl such that the sink cover will be approximately flush with the top of the sink bowls, recessed about 3/4" from the tabletop or drainboard work surface)
Español
