| VENDORS | ||
| Advance Tabco | (31) | |
| All Points | (3) | |
| BK Resources | (2) | |
| Champion | (5) | |
| Component Hardware | (6) | |
| Eagle | (58) | |
| John Boos | (6) | |
| PRICES | ||
| (37) | ||
| $ 262 - $ 845 | (37) | |
| $ 845 - $ 2,200 | (37) | |
| WIDTH (SIDE - SIDE) | ||
| length to be specified | (1) | |
| specify | (2) | |
| 21" | (6) | |
| 22" | (2) | |
| 36" | (1) | |
| 42" | (8) | |
| 48" | (1) | |
| 60" | (3) | |
| 62" | (2) | |
| 63" | (6) | |
| 72" | (1) | |
| 82" | (2) | |
| 84" | (6) | |
| CONSTRUCTION | ||
| solid stainless steel | (18) | |
| stainless steel | (2) | |
| tubular stainless steel | (20) | |
| MOUNT | ||
| table mounted | (2) | |
| wall mounted | (37) | |
Pre-rinse Basket, 17-1/2"W x 19-1/2"L x 2"H, with slide bar, for dishtables, 304 type stainless steel (FLYER)
Slanted Rack Shelf, solid, wall mount, 21"W x 21"D x 21-3/8"H, drip tube on right side, 16/304 stainless steel
Slanted Rack Shelf, solid, wall mount, 21"W x 21"D x 21-3/8"H, drip tube on right side, 16/304 stainless steel (FLYER)
Slanted Rack Shelf, solid, wall mount, 42"W x 21"D x 21-3/8"H, drip tube on right side, 16/304 stainless steel
Slanted Rack Shelf, solid, wall mount, 42"W x 21"D x 21-3/8"H, drip tube on right side, 16/304 stainless steel (FLYER)
Slanted Rack Shelf, solid, wall mount, 63"W x 21"D x 21-3/8"H, drip tube on right side, 16/304 stainless steel
Slanted Rack Shelf, solid, wall mount, 63"W x 21"D x 21-3/8"H, drip tube on right side, 16/304 stainless steel (FLYER)
Slanted Rack Shelf, solid, wall mount, 84"W x 21"D x 21-3/8"H, drip tube on right side, 16/304 stainless steel
Slanted Rack Shelf, solid, wall mount, 84"W x 21"D x 21-3/8"H, drip tube on right side, 16/304 stainless steel (FLYER)
PVC Rollers, 24"L, 2"Diameter, free-wheel, for 14/304 dishtable (Three rollers required for every 12" (305mm))
for each additional linear foot over 36", 14/304 stainless steel
Drain, bleeder type, 3/8" diameter (drain tubing not furnished), 14/304 stainless steel
Pre-rinse sinks with faucet hole & basket waste, 20" x 20" x 5", 14/304 stainless steel
Rack guide, curved, 2" x 1/4" flat bar, 14/304 stainless steel (requires E112)
Field joint, bolted or ready for field welding by others, 14/304 stainless steel
Brackets for booster heater, (Provision by Eagle for installation by others & brackets by others), 14/304 stainless steel
Español
