| SUBCATEGORIES | ||
| Equipment Stands | (1,080) | |
| Work Tables | (17,768) | |
| Work Centers | (138) | |
| Butcher Block Units | (80) | |
| Spreader Tables and Cabinets | (59) | |
| Utility Tables | (62) | |
| VENDORS | ||
| Admiral Craft | (14) | |
| Advance Tabco | (3,453) | |
| All Points | (16) | |
| Alto-Shaam | (14) | |
| APW Wyott | (12) | |
| Arctic Air | (1) | |
| Atosa | (25) | |
| Bakers Pride | (12) | |
| Berkel | (3) | |
| Beverage Air | (10) | |
| Bizerba | (7) | |
| BK Resources | (915) | |
| Blue Air Commercial Refrigeration | (24) | |
| Caddy Corporation | (17) | |
| Cal-Mil Plastics | (2) | |
| Channel Manufacturing | (9) | |
| Cleveland Range | (5) | |
| Comstock Castle | (32) | |
| Crescor | (3) | |
| Dean | (2) | |
| More ... | ||
| PRICES | ||
| (26) | ||
| Less than $ 549 | (2,378) | |
| $ 549 - $ 938 | (2,398) | |
| $ 938 - $ 1,337 | (2,401) | |
| $ 1,337 - $ 1,903 | (2,399) | |
| $ 1,903 - $ 2,570 | (2,404) | |
| $ 2,570 - $ 3,395 | (2,397) | |
| $ 3,395 - $ 4,870 | (2,398) | |
| $ 4,870 - $ 30,000 | (2,412) | |
| DEPTH (FRONT - BACK) | ||
| 10" | (221) | |
| 10-1/2" | (1) | |
| 12" | (282) | |
| 14" | (35) | |
| 15" | (841) | |
| 16" | (32) | |
| 18" | (843) | |
| 20" | (44) | |
| 21" | (6) | |
| 24" | (4,076) | |
| 24-3/8" | (10) | |
| 25" | (24) | |
| 26" | (7) | |
| 27" | (8) | |
| 28" | (1) | |
| 29" | (1) | |
| 30" | (4,531) | |
| 31" | (11) | |
| 32" | (2) | |
| 34" | (2) | |
| More ... | ||
| BASE CONSTRUCTION | ||
| aluminum | (48) | |
| galvanized | (3,219) | |
| stainless steel | (8,426) | |
| steel frame | (1) | |
| wood | (89) | |
| WORK TABLE SPLASH | ||
| contact factory | (1) | |
| without | (5,214) | |
| 1-1/2" | (1,406) | |
| 2" | (7) | |
| 4" | (2,421) | |
| 4-1/2" | (600) | |
| 5" | (1,166) | |
| 6" | (124) | |
| 10" | (214) | |
| GAUGE | ||
| contact factory | (14) | |
| 14 ga | (4,959) | |
| 16 ga | (5,122) | |
| 18 ga | (917) | |
| 20 ga | (16) | |
| TOP STAINLESS TYPE | ||
| wood | (42) | |
| 300 series | (7,809) | |
| 400 series | (2,047) | |
| WORK TABLE EDGE | ||
| contact factory | (54) | |
| marine | (14) | |
| marine/non-drip | (566) | |
| turn down/rolled/ | (1) | |
| turn down/rolled/bull nose | (9,079) | |
| BASE TYPE | ||
| contact factory | (2) | |
| open cabinet w/drawers | (15) | |
| open legs | (7) | |
| open w/16 ga undershelf | (57) | |
| open w/18 ga undershelf | (1,273) | |
| open w/18 ga. undershelf | (12) | |
| open w/crossrails all sides | (18) | |
| open w/side & center crossrails | (47) | |
| open w/side & rear crossrails | (2,524) | |
| open w/undershelf | (2,816) | |
| open with 18 ga undershelf | (2) | |
| open with side & rear crossrails | (2) | |
| open with undershelf | (107) | |
| tubular | (4) | |
| undershelf | (5) | |
| 4 legs | (5) | |
| TOP CONSTRUCTION | ||
| aluminum | (81) | |
| chrome wire | (4) | |
| painted | (14) | |
| stainless steel | (5,359) | |
| wood | (136) | |
Overshelf, table mount, single tier, 72"W x 16"D, heavy duty, 18/430 stainless steel, 1" tubular post, ANSI/NSF 2
Overshelf, table mount, single tier, 32"W x 12"D x 16"H, 430 stainless steel, for sealed well & cold pan tables
Overshelf, table mount, single tier, 32"W x 16"D x 16"H, 430 stainless steel, for sealed well & cold pan tables
Overshelf, table mount, single tier, 47-1/2"W x 12"D x 16"H, 430 stainless steel, for sealed well & cold pan tables
Overshelf, table mount, single tier, 47-1/2"W x 16"D x 16"H, 430 stainless steel, for sealed well & cold pan tables
Overshelf, table mount, single tier, 62"W x 12"D x 16"H, 430 stainless steel, for sealed well & cold pan tables
Overshelf, table mount, single tier, 62"W x 16"D x 16"H, 430 stainless steel, for sealed well & cold pan tables
Overshelf, table mount, single tier, 78"W x 12"D x 16"H, 430 stainless steel, for sealed well & cold pan tables
Overshelf, table mount, single tier, 78"W x 16"D x 16"H, 430 stainless steel, for sealed well & cold pan tables
Wing Table, portable, stainless steel top, channel ledges hold up to (19) 18" x 26" sheet pans, 1-7/16" spacing, stainless steel, Made in USA
Work Table, portable, open design with bottom shelf, stainless steel 27" x 48" top, channel ledges hold up to (15) 18" x 26" sheet pans, 1-1/2" spacing, stainless steel angle frame, Made in USA
Machine Stand, mobile, 21-1/4"W x 25-1/4"D x 21-3/16"H, 18-gauge stainless steel top & undershelf, fully welded stainless steel construction, 4" swivel casters (2) with brakes, NSF, Made in USA
Machine Stand, mobile, 21-1/4"W x 25-1/4"D x 29-3/16"H, 18-gauge stainless steel top & undershelf, fully welded stainless steel construction, 4" swivel casters (2) with brakes, NSF, Made in USA
Machine Stand, mobile, 25-1/4"W x 33-1/4"D x 21-3/16"H, 18-gauge stainless steel top & undershelf, fully welded stainless steel construction, 4" swivel casters (2) with brakes, NSF, Made in USA
Machine Stand, mobile, 25-1/4"W x 33-1/4"D, 29-3/16"H, 18-gauge stainless steel top & undershelf, fully welded stainless steel construction, 4" swivel casters (2) with brakes, NSF, Made in USA
Machine Stand, stationary, 20"W x 24"D x, 21"H, 18-gauge stainless steel top & undershelf, fully welded stainless steel construction, adjustable feet, NSF, Made in USA
Machine Stand, stationary, 25-1/4"W x 33-1/4"D x 21-3/16"H, 18-gauge stainless steel top & undershelf, fully welded stainless steel construction, adjustable feet, NSF, Made in USA
Machine Stand, mobile, 21-1/4"W x 25-1/4"D x 21-3/16"H, 18-gauge stainless steel top & undershelf, fully welded stainless steel construction, 4" swivel casters (2) with brakes, Made in USA
Machine Stand, mobile, 21-1/4"W x 25-1/4"D x 29-3/16"H, 18-gauge stainless steel top & undershelf, fully welded stainless steel construction, 4" swivel casters (2) with brakes, Made in USA
Machine Stand, mobile, 25-1/4"W x 33-1/4"D x 21-3/16"H, 18-gauge stainless steel top & undershelf, fully welded stainless steel construction, 4" swivel casters (2) with brakes, Made in USA
Machine Stand, mobile, 25-1/4"W x 33-1/4"D, 29-3/16"H, 18-gauge stainless steel top & undershelf, fully welded stainless steel construction, 4" swivel casters (2) with brakes, Made in USA
Machine Stand, stationary, 20"W x 24"D x, 21"H, 18-gauge stainless steel top & undershelf, fully welded stainless steel construction, adjustable feet, Made in USA
Lang Marine Cabinet Base, stainless steel, for 130F fryer, 6" adjustable flanged bolt down legs, Marine-cUL, NSF
Español
