Drop-In Frost Top Unit, self-contained refrigeration, 50-1/4"W x 17-1/4"D stainless steel surface, 300 series stainless steel top rim with overhang & locking tabs, steel exterior housing, remote mounted on/off switch with stainless steel face plate (2-3/16"W x 4-1/8"H cutout required), air-cooled condensing unit, 1" brass drain & plug, R134a, 6' cord & NEMA 5-15P, cULus, UL EPH Classified (59"W x 23"D cutout required)
| Manufacturer | Duke |
| Model Number | DUK-ADI-4FT |
| Packed By | Each |
| DEPTH (FRONT - BACK) | 24" |
| WIDTH (SIDE - SIDE) | 60" |
| COMPRESSOR | With 1/4 Hp Compressor |
Cold Food Drop-In Unit, Tri-Channel NSF 7 stainless steel mechanical cold pan, (4) section, 8" deep, holds 1/3, 1/6, 1/9 pans without adding adapters, stainless steel top rim & interior liner, steel exterior, remote on/off switch, 6' cord & NEMA 5-15P, 120V/60/1-ph, 1/3 HP, 6.7 amps, UL, cUL, UL EPH Classified
Drop-In Cold Food Pan, iced cold pan, 46"W x 24"D x 9-1/4"H, accommodates (3) 6" deep 12" x 20" pans, 300 series stainless steel top with overhang, 8" deep 300 series stainless steel interior liner, steel exterior housing, (2) adapter bars included, 1" brass drain & plug, NSF (45"W x 23"D cutout required for unit)
Drop-In Cold Food Pan, refrigerated, 88-7/8"W x 25-1/2"D x 24"H, accommodates (6) 4" deep 12" x 20" pans, 300 series stainless steel top with overhang & locking tabs, 8" deep 300 series stainless steel interior liner, steel exterior housing, remote mounted on/off switch with stainless steel face plate (2-3/16"W x 4-1/8"H cutout required), air-cooled condensing unit, (5) adapter bars included, 1" brass drain & plug, R134a, 6' cord & NEMA 5-15P, UL EPH, cULus, NSF 7 (87-1/2"W x 23-3/4"D cutout required for unit)
Drop-In Cold Food Pan, mechanically assisted ice pan, 74"W x 24"D x 19-1/2"H, accommodates (5) 4" deep 12" x 20" pans, 300 series stainless steel top with overhang & locking tabs, 5" deep 300 series stainless steel interior liner, steel exterior housing, remote mounted on/off switch with stainless steel face plate (2-3/16"W x 4-1/8"H cutout required), air-cooled condensing unit, (4) adapter bars included, 1" brass drain & plug, R134a, 6' cord & NEMA 5-15P, cULus, UL EPH Classified (73"W x 23"D cutout required for unit)
Español